Installing the Camera Base to the Mounting Adapter
After you install the mounting adapter, mount the camera base to the adapter.
1. Attach the lanyard on the mounting adapter to the anchor on the camera base.
2. Pull the required Ethernet cable through the cable entry hole on the camera base.
3. Install the grommet into the cable entry hole on the camera base.
Make sure the grommet flange is securely seated on the inside and outside of the cable entry hole.
4. Connect the cable to the Ethernet port.
The Link LED will turn on once a network link has been established.
5. Align the large orange arrow on the camera base to the side cable entry hole on the mounting
adapter then press the camera base into the mounting adapter. The camera base clicks into place
and is held securely.
(Optional) Using the USB Wi-Fi Adapter
If you have a USB Wi-Fi Adapter (H4-AC-WIFI), attach it to the camera's micro USB port to access the
camera's mobile web interface.
Installing the Camera Base to the Mounting Adapter
13
Summary of Contents for Avigilon 1.3C-H4SL-D
Page 30: ...KN 35 Specifications 25 ...