2MP HD-TVI
Outdoor Mini Dome Camera
Model no: OE-C3422-WR2/WR3
Camera Installation & Confi guration
Please carefully read these instructions before using this product.
Save this document for future use.
35498AC
23221 E Knox Ave
Liberty Lake, WA 99019
1.888.542.1103
www.openeye.net
Precaution
• Do not attempt to dismantle the camera module
mounted within the dome. There are no user serviceable
parts in the camera module. Refer servicing to a qualifi ed
professional.
• Handle the camera with care. Do not abuse the camera.
Avoid striking or shaking it. Improper handling and
storage could damage the camera.
• Do not operate the camera beyond its temperature
or power source rating. Refer to the environmental
information provided in this document.
Features
• 2MP Maximum Resolution
• IP67 Outdoor Rating
• True Day / Night
• True Wide Dynamic Range
• 1/3" Progressive CMOS Image Sensor
• Adaptive IR Technology
• 3-Axis Gimbal
General Specifi cations
Model No.
OE-C3422-WR2/WR3
Maximum Resolution
2MP
Image Sensor
1/3" Progressive Scan CMOS
Type / Format
NTSC
Lens
2.8mm / 3.6mm
FoV
103.5˚ (2.8 mm), 82.6˚ (3.6 mm)
Iris Control
Fixed
Wide Dynamic Range
True WDR
Day/Night
True Day/Night: Auto/Color/BW (Black and White)
Minimum Illumination
Color: 0.005 Lux @ (F2.0, AGC ON)
B/W: 0 Lux with IR
(@ 30IRE)
White Balance
ATW/Manual
Auto White Balance Range
2200K ~ 15000K
Backlight Compensation
Global/WDR/BLC
Auto Gain Control
Yes
Synchronization
Internal Synchronization
IP Rating
IP67
IK Rating
IK7
Operating Temperature
-40˚~140˚F (-40˚~60˚C)
Heater
Yes
Power Consumption
Max 3.5W
Input Voltage
12vDC
IR Range
20M
Weight
0.77 lb. (350g)
Dimensions
Φ
: 4.4” (111mm) x H: 3.2” (82.4mm)
Housing
Metal housing / White / Clear
Country of Origin
China
Box Contents
• Mounting Template (x1)
• Manual/QSG (x1)
• T10 Torx Driver (x1)
• Screws (x3)
• Wall Anchors (x3)
Dimensions
Regulatory Compliance
FCC COMPLIANCE
This product has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. The product
generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the manufacturer’s instruction manual, may
cause harmful interference with radio communications. Operation of this product in a residential area is likely to cause harmful interference, in which case
you will be required to correct the interference at your own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a non-residential installation. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference with the radio or television reception, which
can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
1.
Reorient or relocate the antenna of the radio/television receiver.
2.
Increase the separation between this equipment and the radio/television receiver.
3.
Plug the equipment into a different outlet so that the equipment and the radio/television receiver are on different power mains branch circuits.
4.
Consult the dealer or an experienced radio/television technician for additional suggestions.
3.2" (82.4 mm)
Φ
4.4" (111 mm)
Φ
3.1" (79.1 mm)
0.34" (8.7 mm)
0.2" (3-5.0 mm)
1.52" (38.6 mm)
4" (100.4 mm)
0.68" (12.2 mm)
1.86" (47.2 mm)
