Motorola ASTRO XTSTM 2500 User Manual Download

Page: 57 / 154

ASTRO XTS 2500/XTS 2500

Model III

Common Radio Features

Time-out Timer

The time-out timer turns off your radio’s transmitter. The timer is set
for 60 seconds at the factory, but it can be programmed from 0 to
7.75 minutes (465 seconds) by a qualified radio technician.

Hold down the

PTT

longer

than the programmed time.

You will hear a short, low-
pitched warning tone, the
transmission is cut-off, and

the LED will go out until you
release the

PTT

• Short warning tone
• Transmission is cut-off
• LED goes out

Release the

PTT

button.

• LED re-lights
• Timer resets

Press the

PTT

to re-transmit.

Time-out timer restarts.

• Timer restarts
• RED LED

94C06.book Page 41 Wednesday, June 23, 2010 11:41 AM

Summary of Contents for ASTRO XTSTM 2500



























































































































































Search results

Summary of Contents for ASTRO XTSTM 2500

Reviews:

Related manuals for ASTRO XTSTM 2500

Brands by name

Popular brands

Motorola ASTRO XTSTM 2500, User Manual

Search results

Summary of Contents for ASTRO XTSTM 2500

Reviews:

Related manuals for ASTRO XTSTM 2500

Brands by name

Popular brands