Motorola ASTRO XTSTM 2500 User Manual Download

Page: 27 / 154

ASTRO XTS 2500/XTS 2500

Model III

General Radio Operation

Home Button (

)

The

Home

button will always return you to the home (default) display.

In most cases, this is the current mode.

Some radio features that can be edited by you require saving
information in memory. Pressing the

Home

button while using those

features will cause information to be saved before going to the home
display.

Some features do not require you to press the

Home

button to go to

the home display. This reduces the required number of button
presses.

App Button (TMS Feature Button)

This button brings you to the Text Messaging Service (TMS) feature
screen.

4-Way Navigation Button (

)

This button is used to scroll through the radio’s lists or items in the
display.

94C06.book Page 11 Wednesday, June 23, 2010 11:41 AM

Summary of Contents for ASTRO XTSTM 2500



























































































































































Search results

Summary of Contents for ASTRO XTSTM 2500

Reviews:

Related manuals for ASTRO XTSTM 2500

Brands by name

Popular brands

Motorola ASTRO XTSTM 2500, User Manual

Search results

Summary of Contents for ASTRO XTSTM 2500

Reviews:

Related manuals for ASTRO XTSTM 2500

Brands by name

Popular brands