Installing the MoCA Adapters
SBM1000 SMART Video Adapter Kit
•
User Guide
27
590631-001-a
Figure 23 – Room 1: SBM1400 Adapter Installation
7.
Connect one of the power adapters (included) to the
Power
port on the SBM1400 and plug it
into the electrical wall outlet.
To install the SBM1100 (see Room 3 in Figure 22):
8.
If needed, install the SBM1100 to support a second Smart TV installation in your home (see
Room 3 in Figure 22).
Note
:
Installations that have integrated MoCA gateways do not require a second SBM1000
adapter (see Room 2 in Figure 22). The second SBM1000 adapter can be used to enable a
second room on the MoCA network (see Room 3 in Figure 22).
9.
Disconnect the coaxial cable from your TV or set-top box and connect it to the
IN
connector
on one of the RF splitters (included).
10.
Connect one of the coaxial cables (included) to the
Coax In
connector on the SBM1100 and
one of the
OUT
connectors on the RF splitter (included).
Note
: You can use either
OUT
connector on the RF splitter (included) for this installation.
11.
Connect the second coaxial cable (included) to the coaxial connector on the TV or set-top box
and the other
OUT
connector on the RF splitter (included).
12.
Connect one of the Ethernet cables (included) to the
Ethernet
port on the SBM1100 and the
Ethernet/network
port on your Smart TV or other Smart device.
13.
Connect one of the power adapters (included) to the
Power
port on the SBM1100 and plug it
into an electrical wall outlet.
ο
The
Coax
LEDs on both MoCA adapters should turn ON within five minutes to indicate
that a secure coaxial connection was established between the two adapters.
ο
If the
Coax
LED does not turn ON within five minutes, disconnect and then reconnect
the power adapters on the SBM1100 and SBM1400. If the
Coax
LEDs still fail to turn
ON, see
14.
Power ON your Smart TV, set-top box, laptop, and any other Ethernet-connected devices.
You can now configure your Smart TV and other Ethernet-enabled devices for Internet access
through their related user interfaces.
See