Installing the MoCA Adapters
SBM1000 SMART Video Adapter Kit
•
User Guide
21
590631-001-a
Figure 17 – Room 1: SBM1400 Adapter Installation
6.
Connect one of the Ethernet cables (included) to one of the
Ethernet
ports on the SBM1400
and the
Ethernet/network
port on your Smart TV or other Smart device.
Repeat for each additional SBM1400 Ethernet connection with other networked audio-visual
devices, if applicable.
7.
Connect one of the power adapters (included) to the
Power
port on the SBM1400 and plug it
into the electrical wall outlet.
To install the SBM1100 (see Room 2 in Figure 16):
8.
Locate the cable wall outlet (or RF splitter) and electrical wall outlet in the second room (see
Room 2 in Figure 16).
9.
Disconnect the coaxial cable from your residential modem/gateway and connect it to the
In
connector on one of the RF splitters (included).
10.
Connect one of the coaxial cables (included) to the
Coax In
connector on the SBM1100 and
to one of the
OUT
connectors on the RF splitter (included).
Note
: You can use either
OUT
connector on the RF splitter (included) for this installation.
11.
Connect a second coaxial cable (included) to the
coaxial
connector on the residential
modem/gateway and the other
OUT
connector on the RF splitter (included).
12.
Connect one of the Ethernet cables (included) to one of the LAN Ethernet ports on your
router and the Ethernet port on the SBM1100.
13.
Connect one of the power adapters (included) to the
Power
port on the SBM1100 and plug it
into an electrical wall outlet.
ο
The
Coax
LEDs on both MoCA adapters should turn ON within five minutes to indicate
that a secure coaxial connection was established between the two adapters.
ο
If the
Coax
LED does not turn ON within five minutes, disconnect and then reconnect
the power adapters on the SBM1100 and SBM1400. If the
Coax
LEDs still fail to turn
ON, see
14.
Power ON your Smart TV, set-top box, laptop, and any other Ethernet-connected devices.