English
m
ASTRO
®
APX™
O7 Control Head Mobile Radio
Quick Reference Card
RF Energy Exposure and Product Safety Guide for
Mobile Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before
using the radio, read the RF Energy Exposure and
Product Safety Guide for Mobile Two-Way Radios which
contains important operating instructions for safe usage
and RF energy awareness and control for Compliance
with applicable standards and Regulations.
Radio Controls
Radio On/Off
Adjusting Volume
Selecting a Zone
Selecting a Channel
Receiving and Transmitting
Sending an Emergency Alarm
To exit emergency at any time, press and hold the
Emergency
button.
Power Button
LED Indicators
Emergency
Button*
Multi-function Knob (MFK)*
Home Button
Menu Select Buttons*
Accessory Port (Microphone)
*These controls/buttons are programmable.
Dim Button
DTMF Keypad
Data Button
4-Way Navigation Buttons
Press the
Power
button to toggle the power on or off.
If volume is set as the primary mode,
1
Turn the
MFK
clockwise to increase volume or
counterclockwise to decrease the volume.
If volume is not set as the primary mode, press the
MFK
once and repeat step 1.
If channel is set as the primary mode,
1
Turn the
MFK
until the display shows the desired
channel and press the
PTT
button to begin
transmitting on the displayed zone.
If channel is not set as the primary mode, press the
MFK
once and repeat step 1.
OR
2
>
or
<
to
Zone
and press the
Menu Select
button
directly below
Zone
.
3
D
or
U
until the desired zone is displayed.
4
Press the
Menu Select
button directly below
Sel
or
the
button (on the keypad mic.) to confirm the
selected zone number.
5
Press the
PTT
button to begin transmitting on the
displayed zone.
If channel is set as the primary mode,
1
Turn the
MFK
until the display shows the desired
channel and press the
PTT
button to begin
transmitting on the displayed channel.
If channel is not set as the primary mode, press the
MFK
once and repeat step 1.
OR
2
Press and hold
>
to scroll to
Chan
and press the
Menu Select
button directly below
Chan
.
3
D
or
U
or rotate the
MFK
knob to the desired
channel.
4
Press the
Menu Select
button directly below
Sel
or
the
button (on the keypad mic.) to confirm the
selected channel number.
5
Press the
PTT
button to transmit on the displayed
channel.
1
Take the microphone off hook.
2
Select zone/channel.
3
Listen for a transmission.
OR
>
or
<
to
Mon
then press the
Menu Select
button
directly below
Mon
and listen for activity.
4
Adjust volume, if necessary.
5
Press the
PTT
button to transmit; release to receive.
1
Press the
Emergency
button. A tone sounds and the
display alternates
Emergency
and the home display.
2
A dispatcher acknowledgment
Ack received
display
follows.
AND, Trunking Only:
A high-pitched tone indicates that the alarm has been
received by the trunked system’s central controller.
3
Press and hold the emergency button or the
PTT
button to return to normal operation.
O7CH_QR-Card.book Page 3 Tuesday, September 3, 2013 12:42 PM
Summary of Contents for APX MOBILE O7
Page 1: ......