Motorola APX 8000 User Manual Download Page 38

Page: 38 / 112

Note

No LED indication when the radio receives a
clear (non-secured) transmission in trunking
Mode. LED indication can be preprogramed by

qualified technician to be permanently
disabled. Consult your dealer for further
details if you want to disable it.

Intelligent Lighting Indicators

This feature temporarily changes the backlight of the top display screen, and adds a color bar to the main display
screen to help signal that a radio event has occurred.

Note

This feature must be preprogrammed by a qualified radio technician.

Backlight and Bar
Color

Notification

When

Orange

Emergency Alerts

The radio initiates an emergency alarm or call.

The radio receives an emergency alarm or call.

Red

Critical Alerts

The radio battery is low.

The radio is out of range.

The radio enters Failsoft mode.

The radio is unable to establish a full connection with the system.

The radio is unable to authenticate or register with the system.

Green

Call Alerts

The radio receives a private call.

Identifying Status Indicators

English

Summary of Contents for APX 8000

















































































































Search results

Summary of Contents for APX 8000

Reviews:

Related manuals for APX 8000

Brands by name

Popular brands

Motorola APX 8000, User Manual

Search results

Summary of Contents for APX 8000

Reviews:

Related manuals for APX 8000

Brands by name

Popular brands