Note
When removing the antenna, ensure that
the radio is turned off.
Removing and Attaching the Accessory
Connector Cover
The accessory connector is on the antenna side of
the radio. It is used to connect accessories to the
radio.
Note
To prevent damage to the connector, shield it
with the connector cover when not in use.
1
To remove the accessory connector cover, rotate
the thumbscrew counterclockwise until it
disengages from the radio.
Note
If the thumbscrew is too tight, use an Allen
wrench at to loosen it first.
C
B
A
2
Rotate and lift the connector cover to disengage it
from the radio.
3
To attach the accessory connector cover, insert
the hooked end of the cover into the slot above
the connector.
4
Press downward on the cover’s top to seat it in the
slot.
5
Once in place, tighten by rotating the thumbscrew
clockwise by hand.
Preparing Your Radio for Use
20
English
Summary of Contents for APX 8000
Page 2: ......
Page 110: ...Notes Notes English ...
Page 111: ...APX8000_M1_BackCover fm Page 1 Monday June 1 2015 3 58 PM ...