Advanced Features
English
63
The Man Down feature has three phases:
i
The radio senses the Man Down condition and
Pre-Alert
Timer
is initiated.
ii
Man Down condition continues for the time duration defined
in the
Pre-Alert Timer
field. At the end of this time, the radio
alerts the user on the Man Down status with an audible alert
tone and
Man Down
text on the screen. The Post-Alert
Timer also initiates at this point.
iii
Man Down condition continues for the time duration defined
in the
Post-Alert Timer
field. Once the timer expires, the
Emergency alarm is transmitted. The Man Down Clear
function is used in this phase to cancel the Man Down
condition.
The following scenarios affect the timers:
•
Pressing the PTT button suspends the Man Down timers;
releasing the PTT button reinitiates the Pre-Alert Timer.
•
Pressing other buttons on the radio does not impact these
timers.
•
Repositioning the radio exits the Man Down feature, which
stops and resets the timers.
•
Pressing a preprogrammed
Clear
button or pressing a Menu
Select button preprogrammed for
Clear
stops and resets the
timers. The timers do not restart until the radio is
repositioned.
Note:
Emergency must be set up for this feature to operate.
For details on operating the Emergency alerts, please
see
Emergency Operation
on page 56.
If the radio is preprogrammed to
horizontal
only, it
must be worn in a
vertical
position otherwise the Man
Down alert may be inadvertently triggered.
When the radio is programmed with Man Down
feature, special care is required when charging the
radio with a
wall mounted charger
. See
Handling
Your Radio
on page 114 for details.
Pre-Alert Timer
This timer sets the amount of time that a Man Down condition
must be present before the radio-user is warned of the Man
Down condition.
When the radio detects that it has returned to the vertical
position or when the radio detects motion, the Pre-Alert timer
stops and is reset.
The Pre-Alert timer reinitiates when the radio detects it is in the
horizontal position or motionless again.
APX_2000_M2_Global.book Page 63 Thursday, May 30, 2013 9:49 PM