Advanced Features
English
44
Selecting a Talkgroup
Procedure:
1
<
or
>
to
Tgrp
.
2
Press the
Menu Select
button directly below
Tgrp
. The
display shows the last talkgroup that was selected and
stored,
Sel
and
Exit
.
3
U
or
D
to
Preset
for the preset preprogrammed talkgroup.
OR
U
or
D
to the required talkgroup.
4
Press the
Menu Select
button directly below
Sel
to save the
currently selected talkgroup and return to the Home screen.
5
If the encryption key associated to the new talkgroup is
erased, you hear a momentary key fail tone and the display
shows
Key fail
.
OR
If the encryption key that is associated to the new talkgroup
is not allowed, you hear a momentary key fail tone and the
display shows
Illegal key
.
6
Press
H
to return to the Home screen.
Sending a Status Call
This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name. A maximum
of sixteen status conditions is possible.
Note:
The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Procedure:
Press the preprogrammed
Status
button and proceed to
Step 3.
OR
Follow the procedure below.
1
<
or
>
to
Sts
.
2
Press the
Menu Select
button directly below
Sts
.
3
The display shows the last acknowledged status call, or the
first status in the list.
4
U
or
D
to the required status.
OR
Use the keypad to enter a number corresponding to the
location in the status list.
5
Press the
PTT
button to send the status.
APX_2000_M2_Global.book Page 44 Thursday, May 30, 2013 9:49 PM
