30
AP-8132 Access Point
external network. This ports available differ depending on the access point model deployed. Access
point models with a single port have this option fixed.
•
Enable NAT on the WAN Interface
- Select the checkbox to allow traffic to pass between the access
point's WAN and LAN interfaces.
16. Select
Next.
The Initial AP Setup Wizard displays the
Radio Configuration
screen to define support for
the 2.4GHz radio band, 5GHz radio band or to set the radio's functionality as a dedicated sensor.
17. Set the following parameters for the radio:
•
Configure as a Date Radio
- Select this option to dedicate this radio for WLAN client support in either
the selected 2.4 or 5GHz radio band.
•
Radio Frequency Band
- Select either the 2.4GHz or 5.0GHz radio band to use with the radio when
selected as a Data Radio. The selected band is used for WLAN client support. Considers selecting
one radio for 2.4GHz and another for 5GHz support when supporting clients in both the 802.11bg
and 802.11n bands.
•
Power Level
- Use the spinner control to select a 1 - 23 dBm minimum power level to assign to this
radio in selected 2.4 or 5.0 GHz band. 1 dBm is the default setting.
•
Channel Mode
- Select either
Random
,
Best
or
Static
. Select
Random
for use with a 802.11an
radio. To comply with
Dynamic Frequency Selection
(DFS) requirements in the European Union, the
802.11an radio uses a randomly selected channel each time the access point is powered on.
NOTE
The
ADSP Sensor Support
field displays at the bottom of the screen
only if a radio has been dedicated as a sensor.
Summary of Contents for AP-8132
Page 1: ...AP 8132 Access Point INSTALLATION GUIDE ...
Page 2: ...2 AP 8132 Access Point ...
Page 53: ...Installation Guide 53 ...
