Connector Pinouts
B-3
Using the Ethernet Port
Using the Ethernet Port
Introduction
This section shows examples of devices that can be connected to the AL 200 using
an Ethernet connection and the required cabling.
When You Connect
the AL 200 to a PC
Figure B-1 shows the connection between a cable modem ENET (10/100BT) port
and the Ethernet LAN PC port using a Cat 5 UTP straight-through Ethernet cable.
The wiring diagram is included.
Figure B-1. Modem to PC Connection
When You Connect
the AL 200 to a Hub
Figure B-2 shows a connection using crossover Ethernet cable (not supplied)
between the AL 200 and a hub. The wiring diagram for the crossover cable is
included.
Note
If the configuration includes an intelligent hub or a hub with an intelligent port,
you may not need crossover cable. Refer to the hub documentation.
Figure B-2. Modem to Hub Connection
Computer
Straight-through
Wiring Diagram
Modem
PC
Pins 4, 5, 7, and 8 are unused.
1
2
3
6
1
2
3
6
Multi-User Modem
cable
Hub
Crossover cable
PC
Wiring Diagram
Modem
Hub
Pins 4, 5, 7, and 8 are unused.
1
2
3
6
PC
PC
Straight-through cable
1
2
3
6
Multi-User Modem
Summary of Contents for AL 200
