ENGLISH
113
Voice Instruction
Voice
Instruction
Voice Instruction allows you to operate on your phone using voice instructions. When you speak
the instruction for a certain function to your phone, it will perform the function.
Tips
To use the Voice Instruction function, you have to load voice recognition whenever
you turn on your phone.
Loading Voice Recognition
To use the Voice Instruction function, you have to load voice recognition
first. Press and hold the Select key on the left side of your phone. Your
phone loads voice recognition when a "Loading" prompt box appears on
the screen, as shown in the right figure. After a while, you'll see a mes-
sage prompting you that the loading (loading of voice recognition) has
been completed successfully. Now you may use the Voice Instruction
function. If the screen indicates that the loading fails, you should try to
load voice recognition once more.
Using Voice Recognition
When the voice recognition has been successfully loaded, press and hold the Select key on the
left side of your phone until the phone alerts you with a tone. Speak a voice instruction to the
phone and then release the Select key. Your phone will perform just as you instructed. The
Voice Instruction function is designed with two modes: Name/Instruction mode and Digit mode.
The default mode is Name/Instruction. However, the Digit Dialing function uses the Digit mode.
The "Dialpad" instruction would start the Digit mode and open a dialpad. In the Digit mode, you
Chapter 26 Voice Instruction
ENGLISH
Setup
112
Setup
Master Reset
Reset all user-defined settings to their factory default.
Note
Be careful to use the function!
If you tap Master Reset, your phone prompts you to enter the security code. When you enter
the code, the screen would appear as in Figure 2. Tap OK. If the code is correct, a dialog box
appears for you to confirm your master resetting. To proceed with the function, tap OK; other-
wise, tap Cancel.
Tips
The default security code of your phone is 000000.
Master Clear
Note
Be careful to use the function!
The function fulfills all the functions of Master Reset. Moreover, it will clear all the information
you have entered, including the Address Book entries. The default security code of your phone
is 000000. If you tap Master Clear, your phone prompts you to enter the security code. When
you enter the code, the screen would appear as in Figure 2 on the previous page. Tap OK. If the
code is correct, a dialog box appears for you to confirm your master clearing. To proceed with
the function, tap OK; otherwise, tap Cancel.
Hide
Loading VR. Please
wait...
