English
Wait for the
PTT
Sidetone to finish (if
enabled).
4
Speak clearly into the microphone.
5
If there is no voice activity for a programmed
period of time, the call ends.
When you
receive
an All Call, you cannot use
any programmed button functions until the call
ends.
Scanning Channels
NOTE
: This feature is not applicable in Capacity
Plus.
Press the programmed
Scan
button to turn scan
on or off.
During scan, the yellow LED blinks.
Making a Call Alert
1
Press the programmed
One Touch Access
button to send the Call Alert to a predefined
ID.
2
The green LED lights up.
3
Two chirps indicate that the Call Alert
acknowledge is successfully received.
Sending a Quick Text Message
1
Press the programmed
One Touch
Access
button send a predefined Quick Text Message
to a predefined ID.
2
The green LED lights up.
3
Two chirps indicate that the message is sent
successfully.
OR
A low-pitch tone indicates that the message
cannot be sent.
Sending an Emergency Alarm
1
Press the programmed
Emergency On
button.
2
The green LED lights up.
3
When an Emergency Alarm acknowledgment
is received, the Emergency tone sounds. The
green LED blinks.
OR
If your radio does not receive an Emergency
Alarm acknowledgement, and after all retries
have been exhausted, a low-pitch tone
sounds.
4
Radio exits the Emergency Alarm mode.
If your radio is set to Silent, it will not display any
audio or visual indicators during Emergency
mode.
Privacy
Press the programmed
Privacy
button to toggle
privacy on or off.
NOTE
: Some radio models/locations may not
offer this Privacy feature. Check with
your dealer or system administrator for
more information.
IP Site Connect
NOTE
: This feature is not applicable in Capacity
Plus.
1
Press the programmed
Site Lock On/Off
button to toggle automatic site roaming on or
off.
2
The yellow LED blinks rapidly when the radio
is actively searching for a new site, and turns
off once the radio locks on to a site.
OR
1
Press the programmed
Manual Site Roam
button.
2
A tone sounds and the green LED blinks.
3
You hear a positive indicator tone and the
LED turns off, indicating the radio is locked on
to a site.
OR
You hear a negative indicator tone and the
LED turns off, indicating the radio is unable to
lock on to a site.
