English
Audio Indicators for Programmable
Buttons
Some programmable buttons use audio
indicators to indicate the change as they
alternate between two different choices.
Powering Up and Turning Off the
Radio
Press the On/Off Button briefly to turn on the
radio, and press and hold the On/Off Button to
turn it off.
Adjusting the Volume
Turn the Volume Knob clockwise to increase
volume or counterclockwise to decrease volume.
NOTE
: Your radio can be programmed to have a
minimum volume offset where the
volume level cannot be turned down
fully. Check with your dealer or system
administrator for more information.
Accessing the Radio from Password
Power up the radio.
1
You hear a continuous tone.
2
Press the Channel Rocker to select a digit
and Front Button
P2
to enter the selected
digit. Enter the remaining digits of the
password in the same manner.
3
When the last digit of the four-digit password
is entered, your radio automatically checks
the validity of the password.
If the password is correct:
Your radio proceeds to power up.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1
and 2.
OR
After the third incorrect password, your radio
enters into locked state. A tone sounds and
the yellow LED double blinks.
Your radio enters into locked state for 15
minutes, and responds to inputs from
On/Off
button.
NOTE
: The radio is unable to receive any call,
including emergency calls, in locked
state.
The use of
Emergency
footswitch
cancels out password input to access the
radio.
Selecting a Zone
1
Press the programmed
Zone
button.
2
You hear a positive indicator tone, indicating
the radio has switched from Zone 1 to Zone 2.
OR
You hear a negative indicator tone, indicating
the radio has switched from Zone 2 to Zone 1.
Selecting a Radio Channel,
Subscriber ID, or Group ID
1
Select the zone by pressing the programmed
Zone
button to switch between zones.
2
Press the Channel Rocker to select the
required channel, subscriber ID, or group ID.
Capacity Plus
Press the Channel Rocker to access channels
with Capacity Plus.
Programmable
Button
Positive
Indicator Tone
Negative
Indicator Tone
Zone
In Zone 2
In Zone 1
Repeater/
Talkaround
In Talkaround
mode
In Repeater
mode
Scan
Start Scan
operation
Stop Scan
operation
Squelch
Operating in
tight squelch
Operating in
normal squelch
Power Level
Transmitting at
low power
Transmitting at
high power
Horns and
Lights
The horns
and lights
feature is on
The horns
and lights
feature is off
Tones and
Alerts
All tones and
alerts are on
All tones and
alerts are off
