Motorola 200IP-2P, User Manual

Page: 11 / 65

3.4 SIP Account Settings
200IP-2P IP phone makes calls based on sip accounts, It can support Single account or Multi-
account, Each account can be configured to the different SIP server.
If you want to… Then...
Create an SIP account --1) Select “System setting” > “Advanced setting”
；
--2) Enter the password required
（
The default is empty)
；
--3) Select “SIP” > “Account sip”
；
--4) Select one of the account you want to setting, you can configure the
following parameters
- Enable account* : Select Enable
-Number of lines : Default is 2
-Description : description of this account
- Display Name : The name displayed on the screen
- Authentication user : the Authenticated users are matched with
the SIP server.(The default With the same account)
- Account* : the account matches with the SIP server.(extension
number)
- User pass word* : the user password matches with the SIP server
- SIP Server* : The primary SIP server, all calls through this server
- Out Bound Server : The out bound SIP server
- STUN Type : Enable/Disable STUN feature
-STUN: Input STUN URL
-Auto Answer: Enable/Disable this account auto answer feature
* Note : When you finish the setting, you can press Save to make it
work, and then you can see the status icon in the LCD idle.
The parameters with the * mark must be set.
Disable sip account --1) Select “System setting” > “Advanced setting”
；
--2) Enter the password required
（
The default is empty)
；
--3) Select “SIP” > “Account sip”
；
Motorola