Motorola 150IP-3P, User Manual

Page: 12 / 67

 Press " Save " key to make it work
 Tips " Network is changed, press OK reboot "
Static IP Setting
Feature Operating Steps
Static IP Press OK or MENU > System Settings > Advanced Settings >
Password (Default is Empty)> Network > IP Setting
 Press IP Setting to login in to the menu
 Select " Static " mode
 Press " Enter " key
 Set the IP\Mask\GW\DNS\web port\telnet port
 Press " Save " key to make it work
 Tips " Network is changed, press OK reboot "
3.4 SIP Account Settings
150IP-3P IP phone makes calls based on sip accounts, It can support Single account or
Multi-account, Each account can be configured to the different SIP server.
If you want to… Then...
Create an SIP
account
--1) Select “System setting” > “Advanced setting”
；
--2) Enter the password required
（
The default is empty)
；
--3) Select “SIP” > “Account sip”
；
--4) Select one of the account you want to setting, you can
configure the following parameters
- Enable account* : Select Enable
-Line Keys Use : Default is 1
-Description : description of this account
- Display Name : The name displayed on the screen
- Authentication user : the Authenticated users are matched
with the SIP server.(The default With the same account)
- Account* : the account matches with the SIP server.
(extension number)
- User pass word* : the user password matches with the SIP
server
- SIP Server* : The primary SIP server, all calls through this