HiFi Microphone
Warning!
If the battery outline begins blinking, the charge level has moved below
normal operational limits; you should place the transmitter in the base to charge
immediately.
While the transmitter is charging, the bars in the
Battery Level
icon cycle on and off in series.
For information on charging the transmitter battery,
.
Connection
The
Connection
icon is on the bottom left-hand corner of the display under the
Battery Level
icon, and looks like an antenna
. This icon indicates the state of the connection between the
base and the transmitter.
When the icon shows only the antenna
, the transmitter and the base are synced and have a
fully established connection.
When the antenna and diagonal bars blink together, the transmitter and the base have lost their
connection.
Warning!
When the transmitter and the base lose their connection, no audio is
transmitted to the DVR.
Signal strength
The
Signal Strength
icon appears just to the right of the
Connection
icon and looks like a set of
stair-stepped bars. This icon indicates the strength of the received signal from the base to the
transmitter.
When the icon shows all four stair-stepped bars
, the signal is strong.
When the icon shows less than four bars, two bars for example
, the signal is weaker.
Mode icons
The mode icons on the display indicate whether the transmitter audio is being recorded, which
notification mode is active, and whether Covert mode has been activated or deactivated.
Record
The
Record
icon appears in the middle of the display, just to the right of the
Signal Strength
icon,
and looks like an old-fashioned microphone
. This icon indicates that the transmitted audio is
being recorded by the DVR (
).
28
HiFi Microphone
HiFi Microphone User Guide
WGD00181, Revision A
