Motorola solutions IMPRES 2 NNTN8895, User Manual

Page: 62 / 168

62
Englis
h
IMPRES Battery Fleet Management System
Note: This section is not applicable for 12-Devices Only charger.
IMPRES Battery Fleet Management software automatically collects
critical data from IMPRES 2 or IMPRES battery, after the battery is
inserted into an IMPRES charger. The critical data include battery age,
capacity, charge history, Calibration / Reconditioning history, date
when manufactured, and date when put into service. IMPRES Battery
Fleet Management software analyzes battery data, communicates
battery health, and recommends when to replace the battery. As a
result, you can quickly and efficiently determine when to redeploy the
battery to a less demanding user, when to purchase a new
replacement battery, or when to search for a missing battery.
IMPRES Battery Fleet Management delivers battery-critical
information:
• When batteries are below an acceptable capacity.
• Helps to ensure users have enough capacity for a full work shift.
• Identifies low-capacity batteries so they can be removed from
service.
• Eliminates unexpected downtime and work interruptions.
• Avoids the expense of throwing batteries away prematurely.
• Confirms chargers are optimally distributed and used.
The IMPRES Battery Fleet Management application software is
scalable from a single site to a multi-site networked system, as
represented in Figure 5. The IMPRES Battery Fleet Management
System supports:
• One system Administrator Server
• 19 Remote Clients
• 25 IMPRES Chargers or IMPRES Battery Readers per client
• 25,000 IMPRES Batteries in the same location or over
geographically dispersed areas (the total number of batteries for the
entire system cannot exceed 25,000)
MN004592A01.book Page 62 Thursday, December 19, 2019 9:55 AM