Figure 6:
RAID created
6. If Storage 2 is not
Ready
, wait a few minutes and check again.
7. After Storage 2 is confirmed as
Ready
, navigate to the
Alert Log
(
System > Logs > Alert
) to check that
the storage configuration initialization is complete, as shown in
.
Note:
If RAID Initialization is not logged as complete after the Storage 2 state is confirmed as
Ready
, contact technical support for assistance completing the RAID Initialization.
Figure 7:
Alert log
Initializing the Second Storage Volume
Once you have created and configured the second storage it must be initialized in the NVR.
Initializing the Second Storage Volume
8
