8. In the Server State setting area, select
Enable,
click
Apply
, then
Save Running Configuration
.
Figure 8:
The DHCP Server Settings page.
The appliance is now set to act as a DHCP server.
As you add cameras and network devices, the IP address for each item will be listed beside the
connected port number.
Note:
The corporate network ports on the HD Video Appliance are not part of this DHCP
setting. Only the camera network ports broadcast DHCP.
9. Connect Avigilon cameras and other network devices to the numbered ports.
Each connected device is automatically assigned an IP address by the appliance.
Configuring the Internal DHCP Server
14
