3. In the Network Connections window, right-click the Ethernet 5 network connection. and select
Properties
.
Note:
Do not change or disable any of the other network connections.
Important:
If Ethernet 5 is not set to TEAM: A or does not appear, contact Technical Support.
4. In the Properties dialog box for the teamed NIC (Ethernet 5 ), double-click
Internet Protocol Version
4 (TCP/IPv4)
.
Figure 4:
The Network Connections window showing the Properties dialog box for the teamed NIC. (Used with permission from
Microsoft.)
5. In the dialog box that appears, select the
Use the following IP address:
option and assign the static IP
address in the same subnet as the cameras that you obtained.
6. If you would like to access the Internet through the HD Video Appliance, you can add an Internet
connection to one of the corporate network ports. The corporate network ports are separate from
the numbered camera ports, so they will not interfere with video recording.
Connecting to Cameras with Static IP Addresses
9
