4. In the Ethernet 5 Properties dialog box, double-click
Internet Protocol Version 4 (TCP/IPv4)
.
Figure 5:
The Control Panel Network and Internet Network Connections window showing the Ethernet 5 Properties dialog box. (Used
with permission from Microsoft.)
5. In the dialog box that appears select the
Use the following IP address:
option and assign a static IP
address for the appliance so that it can connect to the switch component.
By default, the appliance is not connected to the switch component. The appliance must be
connected to the switch component before you can configure the system to be a DHCP server.
The default IP address of the switch component is 192.168.2.1.
Do not
assign this address for the
appliance. You can use 192.168.2.
2
or higher. It is recommended that you only change the last digit.
Configuring the Internal DHCP Server
11
