5A
5B
1
2
3
B
A
A
B
C
D
E
450mm
15mm
CSV100
CSV100
CSV100
EN
EN
04. INSTALLATION
EMERGENCY UNLOCK
INSTALLATION MEASURES
04. INSTALLATION
•
The table below indicates
the measure which quota
B
should have in function
of the quota
A
measure.
SUPPORTS INSTALLATION
1 • Drill holes for M8 screw anchors.
•
You must use appropriate anchorages for the type
of surface where the automation will be installed.
2 • Place the anchors in the holes, press the pla-
te against the wall and fix it with the appropriate
screws.
3 • Attach the front support to the door leaf,
following the dimensions of
Fig. 10
. •
450mm from
the door hinge and 15mm below the motor support.
Use M8 bolts for fixing the supports.
Fig.8
Fig. 9
Fig. 10
The emergency unlock should only be used in case of emergency, electrical failure or
malfunction.
Fig. 5
To unlock...
insert the unlock key into the automation front hole
and turn it on clockwise 4-5 times until you feel a
limit.
To lock...
Rode a chave no sentido contrário até sentir um ob-
stáculo.
EXTERNAL UNLOCK
Fig. 6
Fig. 7
The kit exemplified below is not included in the
TELICA Kit
.
1 • Pass the cable into the
TELICA
through the cable
gland.
2 • Place the cable sleeve in the indicated location
and fix it with a washer and a screw.
3 • Pass the steel cable through the hole in the trig-
ger and fix it with a end-fixing. Cut the excess.
The cable can then be connected to a security box
as in
fig. 7
to allow external unlocking.
QUOTA A
QUOTA B
máx. 350 mm
170 a 210 mm
300 mm
120 a 220 mm
250 mm
110 a 250 mm
200 mm
100 a 250 mm
150 mm
100 a 250 mm
mín. 100 mm
100 a 270 mm
QUOTA A • Vertical distance between the center of the hinge and the center of the motor shaft.
QUOTA B • Horizontal distance between the center of the hinge and the center of the motor shaft.
Security
Box
