6
1
2
3
5
6
4
EN
• INCORRECT INSTALLATION
This installation does
not allow access to the
batteries. Change the
motor orientation.
• CORRECT INSTALLATION
After changing the
orientation of the motor, it
is possible to access them
without hindrance.
LEFT INSTALLATION
OBSTACLE
OBSTACLE
ORIGINAL MOTOR POSITION
•
Slide 1024 is shipped from the factory as
shown in this image.
BATTERIES
BATTERIES
BATTERIES
If there is an obstacle that prevents
access to the batteries, you must
change the orientation of the motor.
03. INSTALLATION
CHANGE MOTOR ORIENTATION
Remove screws.
Rotate motor body
(marked with dark gray).
Tighten the screws again.
Rotate everything (motor
and plate) so as to direct the
pinion to the rack.
Tighten the 4 fixing screws
to the ground and insert
the cover.
Final position.
CHANGE MOTOR ORIENTATION
If the fixing plate is already tightened on the foundation, it is necessary
to unscrew it in order to change the orientation of the motor.
