MFE
A
A
B
A
EN
• Power supply
36Vdc/24Vac
• Consumption
50mA
• Distance
12 meters
• Working Temperature
-25°C ~ +65°C
• Relay Capacity
“Volt-free contacts”
• Protection grade
IP54
• Polarization filter
This feature prevents reflections caused by reflective objects.
Red
Orange
Green
Signal strength
No signal
Low
Medium
High
TECHNICAL CHARACTERISTICS
LEDs
FIXING THE PHOTOCELL
01.
OPERATION/PROGRAMMING MANUAL
60mm
115mm
53mm
38mm
96mm
OPEN THE PHOTOCELL
01
• Place the photocell base in the desired location so that the power cable passes through the hole
in the base.
02
• Mark the location of the 3 fixing holes and drill the holes.
03
• Secure the photocell with suitable bushings and screws.
04
• Connect the wires to the circuit board (wiring diagram image).
05
• Turn on the photocell without placing the photocell cover.
INSTALLING THE PHOTOCELL
Recommended
height:
500mm
Junction
box
A
-Hole for
screws
B
-Hole for
cables
01
• Press the chrome part in the
areas indicated in the image.
02
• Slide the chrome part.
03
• Open the photocell by
separating the pieces from the
bottom part.
Max. Distance
12 meters
LEDs
