3A
3B
2A
2B
EN
EN
• Power supply
230V AC 50-60Hz
• Lightbulb’s output
230V AC 50Hz 100W max.
• RGB Lightbulb’s output
24V DC 100mA max.
• Motor’s output
230V AC 50-60Hz 1000 W max.
• Auxiliary accessories output
24V DC 8 W max.
• Security and BT transmitters
24V DC
• Working temperature
-10°C to + 55°C
• Incorporated Radio Receptor
433,92 Mhz
• OP Transmitters
12bits or Rolling Code
• Maximum Memory Capacity
100 (full opening)
• Control board Dimensions
105x130 mm.
The
MC50SE
is a monophasic control board com a control system via incorporated rádio,
developed for the automation of sectional door.
01
• Grounding
02
• Grounding
03
• 230V Line Input (phase)
04
• 230V Line Input (neutral)
05
• 230V Motor’s Output – Opening
06
• 230V Motor’s Output – Common
07
• 230V Motor’s Output - Closing
08
• AC 230V Lightbulb Output
09
• AC 230V Lightbulb Output
01
• Close Push Button input
02
• Open Push Button input
03
• Motor’s opening limit-switch input (OPEN)
04
• Motor’s closing limit-switch input (CLOSE)
05
• Common
01
• 24V DC 200mA max power supply 24V
02
• 24V DC 200mA max power supply ( )
CN1
• CONNECTOR’S DESCRIPTION
CN2
TECHNICAL SPECIFICATIONS
02. THE CONTROL BOARD
STANDARDS TO FOLLOW
CN3
01.
SAFETY INSTRUCTIONS
• It is important for your safety that these instructions are followed.
• Keep these instructions in a safe place for future reference.
• The
ELECTROCELOS S.A.
is not responsible for the improper use of the product, or other use than that for which
it was designed.
• The
ELECTROCELOS S.A.
is not responsible if safety standards were not taken into account when installing the
equipment, or for any deformation that may occur.
• The
ELECTROCELOS S.A.
is not responsible for insecurity and malfunction of the product when used with
components that were not sold by the them.
• This product was designed and manufactured strictly for the use indicated in this manual.
• This control board is not appropriate for inflammable or explosive environments.
• Any other use not expressly indicated may damage the product and/or can cause physical and property damages,
and will void the warranty.
• Do not make any changes to the automation components and/or their accessories.
• Control board for indoor use with 230V connection.
• Keep remote controls away from children, to prevent the automated system from being activated involuntarily.
• The customer shall not, under any circumstances, attempt to repair or tune the automatism. Must call qualified
technician only.
• The installer must have certified professional knowledge at the level of mechanical assemblies in doors and
gates and control board programmation. He should also be able to perform electrical connections in compliance
with all applicable regulations.
• The installer should inform the customer how to handle the product in an emergency and provide him the
manual.
ATTENTION:
This product is certified in accordance with European Community (EC) safety standards.
This product complies with Directive 2011/65/EU of the European Parliament and of the
Council, of 8 June 2011, on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
(Applicable in countries with recycling systems).
This marking on the product or literature indicates that the product and electronic
accessories (eg. Charger, USB cable, electronic material, controls, etc.) should not be
disposed of as other household waste at the end of its useful life. To avoid possible harm
to the environment or human health resulting from the uncontrolled disposal of waste,
separate these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Home users should contact the dealer where they
purchased this product or the National Environment Agency for details on where and how
they can take these items for environmentally safe recycling. Business users should contact
their vendor and check the terms and conditions of the purchase agreement. This product
and its electronic accessories should not be mixed with other commercial waste.
This marking indicates that the product and electronic accessories (eg. charger, USB cable,
electronic material, controls, etc.) are susceptible to electric shock by direct or indirect contact
with electricity. Be cautious when handling the product and observe all safety procedures in this
manual.
