11A
11B
360
0
1
3
1
3
2
1
4
1
3
2
EN
EN
03. INSTALLATION
03. INSTALLATION
MOTOR COVER ASSEMBLY
LED LIGHTING KIT ASSEMBLY
FIX THE LED LIGHTING TAPE
Unwind the LED lighting strip and install it on the framing frieze
all around the awning!
The LED strip tips should be in the corner of the motor head so
that the LED and motor wires stick together.
CONNECTION TO CONTROL BOARD
Pass the LED wire through the most convenient place to get it to
the control board
FIT TRANSLUCENT PROFILE
Cover the frieze with the translucent profile provided, to hide the
LED lighting strip.
PROFILE CLIPPING
Clip the motor cover profile to the motor profile.
ATTACH PROFILE
Fit the motor cover profile into the rotational zone of the motor
base section.
Please note that when rotating the motor cover, the
slots on the cover must correspond to the position of
the motor arm so that there are no collisions.
FIX THE PROFILE
Turn the motor cover profile to the horizontal position.
MOTOR COVER FIXING
Tighten the motor cover to the motor base with two self-tapping
screws on the ends of the motor.
1
2
3
1
2
3
4
