Motomaster 011-2064-0, Instruction Manual

Page: 12 / 13

20
model no. 011-2064-0 | contact us: 1-888-942-6686
21
TROUBLESHOOTING TROUBLESHOOTING
00
Psi
126
V
OK
00
Psi 126
V
00
Psi
126
V
The unit has detected a good connection with a battery.
Proceed to Step 6.
Follow Opeartion with correct sequence (step 1-2-3-4-…) on page 12-13.
00
Psi
126
V
（
alarm
）
00 50
Psi
OK
00
Psi
OK
The vehicle battery is less than 2 V, which can’t be
detected by the unit.
The unit function normally
Low battery
The surroundings is in very low temperature.
The temperature is extremely high during charging. Plug off until it cools down
Waiting 3 seconds until flickers completed.
Power on and wait for a few minutes until icon disappears, the unit is
warmed up and ready for use.
Recharging
The program only allow 50 seconds for complete
the jumping. The unit can’t jump vehicle after 50
seconds.
The program only allow 30 seconds for override vehicle.
The unit can’t override vehicle after 30 seconds.
Good connected, ready for next step.
Operation Sequence Error
Battery Clamps reverse connected, and they are
connected before unit powered on.
Operation Sequence Error
The battery clamp is connected before unit
powered on.
Follow Opeartion with correct sequence (step 1-2-3-4-…) on page 12-13.
Speed up, Follow step 3 to step 8 in 50 seconds (refer to 'operation’ on page 10 to
jump vehicle)
Follow step 5 to step 7 in 30 seconds (refer to ' Low Voltage Batteries & Manual
Override ' on page 12-13 to jump vehicle)
Problem Possible Cause Solution
The number 30/50 flickers
Follow 'Low Voltage Batteries & Manual Override’ on page 12-13 to jump vehicle.
The Icon of connection indicator
flickers, and beeping
The Icon of connection indicator
flickers and caution appears