background image

UNDERSTANDING THE MULTI-STAGE CHARGING PROCESS

STAGE 1 DESULPHATION*

Pulses of voltage and current help recover sulphated or deeply discharged batteries.

STAGE 2 SOFT START*

Gently introduces current to condition deeply discharged batteries and prevent overheating that 
could damage the battery.

STAGE 3 BULK

Charging with maximum current to bring the battery to about 80% capacity.

STAGE 4 ABSORPTION

Charging with constant voltage while reducing current to safely bring the battery to 100% capacity. 
This stage is key to maximizing battery performance and battery life.

STAGE 5 ANALYZE

Tests if battery is holding charge.

STAGE 6 MAINTAIN

Monitors battery voltage and provides top-up charging when necessary to keep battery fully 
charged.
 * If necessary

MAINTENANCE AND CARE

• Wipe clean cords and clamps after each use.
• Store the power and output cables neatly to prevent damage.
• The charger housing may be cleaned using a damp cloth and mild cleaning agent.
• Always unplug the charger when not in use.
• Keep the charger stored in a cool, dry place.

Model no. 011-1975-8 l  Questions? Contact us 1-888-942-6686

14

UNDERSTANDING THE MULTI-STAGE CHARGING PROCESS

*

*

*

*

MAINTENANCE AND CARE

Summary of Contents for 011-1975-8

















Reviews: