headline bars
tabs
con
tinua
tion tabs
not
es
w
ar
nings
headline bars
tabs
continuation tabs
notes
warnings
headline bars
tabs
continuation tabs
notes
warnings
8
model no. 009-1518-6 | contact us 1-888-942-6686
6
7
8
ASSEMBL
Y
headline bars
tabs
continuation tabs
notes
warnings
WARNING!
The unit must be installed according to the instructions. Never
install more than one unit on any two wall studs. All fasteners
must be checked and tightened periodically.
FPO
Small Round Tube (D) is already
inserted into Large Round Tube (C) in
the package. Carefully carry out the
two-tube set, connect the end of each
tube to the Horizontal Support using
Bolt (F) and Spring Washer (G). Repeat
for the other two-tube set.
Note: Small/Large Round Tubes can be
positioned in several locations along
the Horizontal Support depending on
the size of the tires to be held on the
tire rack. Please refer to the following
chart to choose proper location of
tubes.
Check for tightness of all hardware. If
necessary, adjust tightness so that the
rack folds easily for storage.
Frequently check the condition of the
tire rack. Make sure all components
are in good condition. If the tire rack
becomes damaged through accident,
or if any damage is noted, the product
should be replaced. Keep the tire rack
clean of dirt, grease and oil. Clean with
a moist cloth and mild detergent.
Location of
Tubes
Dia. of Tire
1 and 3
30 to 40 cm
1 and 4
40 to 56 cm
1 and 5
56 to 66 cm
2 and 5
66 to 76 cm
STEP 6
C
D
C
D
G
F
G
F
G
G
F
F
1
2
3
4
5
STEP 7
