headline bars
tabs
continuation tabs
notes
warnings
headline bars
tabs
con
tinua
tion tabs
not
es
w
ar
nings
headline bars
tabs
continuation tabs
notes
warnings
model no. 009-1518-6 | contact us 1-888-942-6686
6
ASSEMBLY
Plan for the proper location of the tire
rack. The product must be attached to
a wall surface with vertical studs, and
can be positioned between 32 and 48”
(81.2 and 121.9 cm) (centre to centre)
apart. Use a stud finder (not included)
to assist in locating studs. Use a pencil
to mark the top mounting hole centres.
Make sure holes are level. Pre-drill the
marked holes using a 3/16” (4.8 mm)
drill bit.
Note: the tire rack must be mounted
directly into the wall studs; do not use
wall anchors to mount to sheetrock.
Use Lag Screw (E) through the top
mounting hole of Left Support Assembly
(A) and Right Support Assembly (B) to
hold in place. Do not tighten Lag Screw
(E) completely at this time.
Make sure Left Support Assembly (A)
and Right Support Assembly (B) are
vertically level to each other. Use the
remaining 2 mounting holes in each as
template, and drill the holes on the wall
studs.
1
1
3
2
ASSEMBL
Y
STEP 2
A
B
E
E
STEP 3
A
B
x
between 32 and 48” (81.2 and 121.9 cm)
(centre to centre)
STEP 1
x