9 How it works
The mo.lock works on the basis of NFC technology.
The ignition lock sends electromagnetic pulses, which the key can use to send back its iden-
ti
fi
er. Therefore the key does not need an internal battery.
The mo.lock penetrates electrically non-conductive material and can sofore be integrated
hidden into the vehicle (e.g. behind a side cover). Also the key can be sewn into the glove,
for example. Material between the mo.lock and the key may reduce the switching distance.
In order to prevent vehicle battery from discharging during the winter break, we recommend
disconnecting the ground pole of the battery from the vehicle.
10 How to use
When the key approaches the active surface of the mo.lock, the on-board voltage is switched
on, which is displayed by a green status LED. When approaching again, on-board voltage
will be switched o
ff
, then the status LED is also o
ff
. A waiting time of 2s between these two
switching operations is required.
If the mo.lock is not used for more than 16 hours, it enters power-saving mode, after further 8
days it goes into a sleep mode.
The key must then be brought close to the lock for a period of 2 seconds in order to trigger a
switching process.
