GB.1-V2
MOTOBATT MBPro POWERSPORTS BATTERY and
CHARGING / STARTING SYSTEM ANALYZER with
”Test-N-Charge” Capability
IMPORTANT : ALL New “Test-N-Charge” Feature!
The MotoBatt MBPro Tester features an “Industry First”
product capability!
On PowerSports vehicles especially but on an ever
increasing number of vehicles in general, the battery is
located in a “hard to get at” location therefore proper battery
and battery system maintenance just doesn’t get done and
the battery fails prematurely leaving you stranded due to lack
of proper charging and testing.
As a customer solutions focused products provider we have
built-in a new and unique capability into the MotoBatt MBPro
and the MBMini battery and system testers that makes the
job a snap!
The part # MBTEL (pictured above) is a unique battery
Testing and Charging lead that is designed to permanently
mount on the vehicle battery allowing for both battery
maintenance charging using the industry standard SAE two
pin connector and use of the MBMini or MBPro battery tester
for a full on battery, starting and charging system test all done
away from the battery. All you have to do is purchase the
part# MBTEL, mount it to your battery, run the lead end away
from your battery (up to 24 inches) to an accessible location
and you’re in business!
The part# MBTCL (Clip Lead) comes with the tester for direct
to battery testing.