Moto Parilla TRILIX 250, Use And Maintenance Manual

Page: 62 / 74

60
6
Ed.0 - 06/2020
Cleaning and Maintenance
· ask a second person to lift the rear
wheel in a way that it is not in con-
tact with the floor and then turn
the crank arm
very slowly
in the
direction of travel to distribute the
detergent.
Make sure all of the chain has been
lubricated.
· Apply a small amount of bike chain
lubricant onto the joints of the
chain itself.
The use of an excessive
amount of lubricant or an in-
adequate product can cause
dripping onto the brake disc
thus dirtying it and greatly re-
ducing braking efficiency.
· Remove the excess lubricant from
the chain using a clean, dry and
lint-free cotton cloth.
- Clean the rims and brake discs with a
suitable de-greaser (consult the man-
ufacturer).
ONLY use lubricants expressly
indicated for bike chains.
Promptly take the bike to the
manufacturer or authorised
workshop specialising in bikes
for the inspections prescribed.
It is the only way to identify
and safely repair worn parts
and damage.
6.3 CLEANING THE BIKE
Proceed as follows:
-
Remove the battery pack.
- Use a delicate jet of air to remove
coarse dirt such as earth, pebbles,
sand, grass, etc.
- Leave the bike to dry.
- Spray all of the bike with a suitable
detergent.
- Thoroughly rinse all parts of the bike
with a delicate jet of water.
A sponge or cloth can also be used
for washing with water
- Leave the bike to dry.
Do not aim the jet of water to-
wards the control instrument.
- Clean and lubricate the chain:
· pour a few drops of chain deter-
gent onto a clean, lint-free cotton
cloth.
· rub the chain with the cloth.
· advance the chain and pass the
soaked cloth on the remaining part
of the chain.