background image

Ed.0 - 06/2020

1

9

Warnings and Safety

• 

Do not leave the battery pack and 

battery charger under the sun or near 

to heat sources (e.g. stoves, heaters, 

etc.).

•  Never  use  the  battery  charger  or 

batteries if they have any type of 

damage whatsoever.

•  Never use the battery charger if the 

insulation of the cables or one or 

more plug connections are dam-

aged. In his case, only grip the plug 

in an isolated point.

-  General hazards

•  Never  move  hands,  feet  or  other 

parts of the body towards moving 

bike parts (wheels, chain, gears). 

Injury hazard.

•  In the event of rain, snow or slippery 

roads, reduce speed and increase 

the safety distance from other vehi-

cles.

•  It is recommended to avoid pools 

of water where the level can come 

into contact with the electronic part 

of the vehicle, located in the black 

case in front of the engine.

•  Do not leave the bike in the car un

-

der the sun.

After a long descent, the brake 

discs (1) may be very hot. 

· Do not touch the brake discs 

immediately after a descent. · 

Leave them to cool for at least 

5 minutes before touching 

them. · To check the tempera-

ture, just touch the brake discs 

briefly with a finger. If they are 

very hot, wait a few minutes 

and repeat the test until the 

discs have cooled down.

1

1

Summary of Contents for TRILIX 250











































































Reviews: