MOTO GUZZI
•
Quota 1100 ES
•
Owner’s Manual
Contains toxic materials (Pb and H2SO4)
Extremely high current, avoid short circuit.
DO NOT charge in a gas tight container.
Sealed Lead Battery.
Must be recycled or disposed of properly.
These operations are best carried out by an authorized dealer.
Replacing bulbs
Headlight
(fig. 31)
To change the bulbs, loosen the screws “A” to remove the instrument panel, disconnect the
wiring connections from the rear, remove the rubber protective cap and release the lamps.
After having reassembled the unit, make sure no other wiring connection has been
accidentally disconnected.
The lamp holder, complete with side light bulb, is push fitted.
N.B. - When changing the headlight bulb (driving/dipped beams) take care not
to touch the glass part of the bulb with your fingers.
Instrument panel
(fig. 31)
Remove the instrument panel, after having loosened screws «A», remove the control
warning lamp units and instrument lamp units, and change the bulbs.
Tail light
(fig. 32)
Undo screws «A», which attach the reflector to the unit; to remove the bulb from its holder,
press in and turn.
43
