MOTO GUZZI nevada, Service Station Manual

Page: 168 / 198

•
Slide off the bearing from the cover us-
ing the suitable punch.
•
Remove the external ring of the needle
bearing from the housing using the
suitable extractor (19927500).
•
Remove the sealing ring and the wash-
er.
Controllo
•
Check that the drilled bolt tongues, where the anti-vibration rubbers operate, are not spoiled;
that the surfaces of: the sealing ring; the bearing on the cover, the external ring of the bearing
on the housing; the groove for the circlip on the drilled bolt are not worn, deformed or spoiled;
otherwise, replace them.
•
Check that the sealing ring on the housing is not shattered or is still flexible; otherwise,
replace it.
•
That the needle bearing on the housing does not have flattened or worn rollers; otherwise,
replace it.
•
Check efficiency of every component and that the coupling surfaces of the housing and cover
are not scored or distorted.
Accoppiamento pignone corona
Chassis
NEVADA - NEVADA ANNIVERSARIO
CHAS - 168