MOTO GUZZI Griso V1100, Workshop Manual

Page: 46 / 182

GENERAL TECHNICAL INFORMATION
2 - 27
Griso V1100
• Remove both pins.
•
Remove the vibration damper.
•
Remove one pad at a time.
WARNING
Do not operate the brake lever when the pads
are not in place or the calliper pistons might
come out of their housing, thus causing brake
fluid leakage.
•
Install two new pads, fit them so the holes match those
on the calliper.
WARNING
Always change both pads and ensure that they
are correctly in place inside the calliper.
• Fit the vibration damper; remember that the arrow must
indicate the direction of travel.
•
Insert both pins.
•
Fit both split pins.
• Pull the brake lever several times to take the pistons
against the pads.
•
Check the brake fluid level.