GENERAL INFORMATION
1 - 5
Griso V1100
1.2 GENERAL
RULES
1.2.1
BASIC SAFETY RULES
CARBON MONOXIDE
When an operation must be performed with the engine running, position the motorcycle outdoors in a well-ventilated
area.
Never run the engine in an enclosed place.
Use an exhaust emission extraction system when working indoors.
DANGER
Exhaust gases contain carbon monoxide, a poisonous gas which, if inhaled, may cause loss of
consciousness or even death.
FUEL
DANGER
The fuel used to operate engines is highly flammable and becomes explosive under particular
conditions.
Refuelling and maintenance operations should be carried out in a well-ventilated area, with the engine
off.
Do not smoke when refuelling or in the proximity of sources of fuel vapours. Avoid contact with bare
flames, sources of sparks and any other source which may ignite fuel or lead to explosion.
DO NOT DISPOSE OF FUEL IN THE ENVIRONMENT.
KEEP AWAY FROM CHILDREN.
HOT COMPONENT PARTS
The engine and exhaust component parts become hot when the engine is running and will stay hot for some time after
the engine has been stopped.
Wear insulating gloves before handling these components or allow for the engine and the exhaust system to cool down
before proceeding.
USED GEARBOX AND FORK FLUIDS
DANGER
Wear latex gloves when servicing.
Prolonged or repeated contact with gear fluid may cause severe skin damage.
Wash your hands thoroughly after handling.
Dispose of it through the nearest waste oil reclamation firm or through the supplier.
Wear latex gloves when servicing.
DO NOT DISPOSE OF FLUID IN THE ENVIRONMENT.
KEEP AWAY FROM CHILDREN.
BRAKE FLUID
WARNING
Brake fluid can damage plastic, rubber or painted parts. When servicing the brake system, protect all
such parts with a clean cloth.
Always wear safety glasses when servicing the brake system.
Brake fluid is highly irritant. Avoid contact with the eyes.
In case of contact with the eyes, rinse thoroughly with cool, clean water and immediately seek medical
attention.
KEEP AWAY FROM CHILDREN.
Summary of Contents for Griso V1100
