Figure 2
1.4. Installation
Rotary index tables must be installed in accordance
with regulations outlined in the documentation. The in-
stallation position is user defined, and must be disclosed
to MID when ordering the rotary index table.
Check before installation that the delivery is complete
and correct.
Please verify that the rotary index table is correct by
checking the identification plate, see Figure 2.
1.5. Transport and storage
Generally, rotary index tables should be stored and in-
stalled in a dry, clean environment. When transporting,
only use means of transport and hoisting gear that has
been approved for the weight of the rotary index table
in question.
In order to lift the rotary index table, please use three or
more eye bolts. Tapped holes provided. (See table 1.1
for proper size)
1.6. Identification plate
The following information can be found on the ID plate:
1.7. Electrical connection
(only applies if the drive is included)
Work on the electrical installation may only be carried
out by trained specialists. Please adhere to all technical
and country-specific regulations and standards during the
installation. Our rotary index tables are driven by three-pha
se brake motors as standard. Connect the motor and brake
only to the power supply as specified on the type plate.
The motors must be protected from overload by means of
motor overload switches or other suitable protective de
vices.
Manufacturer
Model Size
Serial Number
Shop Order Number
Figure 1
Summary of Contents for RT100
Page 1: ...TMF SERIES MANUAL ...
