MOTION
CM-35 ELECTRONIC CURTAIN MOTOR
MOTION
CM-35 ELECTRONIC CURTAIN MOTOR
Frequently Asked Questions
Problem
Cause
Solution
Blind does not work.
Power supply is not connected.
Connect the power supply to the motor.
Remote battery is empty. (LEDS of
remote are flashing rapidly.)
Replace the battery in the remote.
See the manual of the remote.
Remote battery is inserted
incorrectly.
Replace the battery in the remote.
See the manual of the remote.
Radio-frequency interference
Make sure that the antenna of the motor
is out of the way from metal objects.
The distance from the remote to
the motor is too far.
Move closer to the motor.
The remote is not connected to
the blind.
Pair the remote to the motor.
See step 6.
Multiple blinds respond to
a remote. (Unable to
program a single blind)
Multiple blinds are paired to a single
channel.
Pair the blind to a free channel to
program or use single select to program
the blind.
Blind moves in small steps. No end limits are programmed.
Program end limits. See step 5 - 6.
Favorite position can not
be programmed.
No end limits are programmed.
Program end limits. See step 5 - 6.
Blind moves in the opposite
direction.
The direction of rotation has been
set incorrect.
Change the direction of rotation.
See step 4.
The blind keeps moving left
and right.
The blind is in program mode.
Press the program button on the motor
to exit program mode.
English
24
25
