background image

10

B12. Untie the 

safety belt

Notes:

 Please ensure all goods placed on the platform are securely strapped in place before 

starting to move them.

1. 

When lifting the platform, it is required to ensure that the castors have brakes applied, and  

 

avoid the movement of the platform during the lifting and lowering operation, and it is  

 

better to hold the wheelchair with one hand.

2. 

When the power plug is connected with the wheelchair power supply, it is required to fix  

 

the fastening tape onto the wheelchair and insert the power plug. Otherwise there will be  

 

the risk that the power plug pops out.

3. 

After the operation, the controller is placed into the battery pack, to avoid being broken or  

 trampled.

* If you have opted to purchase the dedicated Elev8 Battery and charger then please 

follow these instructions.

External battery connection operation

B15. Collect the 

controller and power 

plug into the battery 

pack, and buckle the 

safety belt. Place the 

platform car into the 

trunk of the vehicle or 

other proper position.

B13. When one 

end is lifted up, the 

wheelchair will be 

moved away from 

the platform after 

the landing of the 

motor wheel of the 

wheelchair.

B14. Buckle the 

safety belt

A

B

Use Instruction

Summary of Contents for Elev8













Reviews: