background image

9

1) Dismounting Operation

B1. Take out the 

controller and 

power plug from 

the battery pack.

B11. Move the platform 

car from the vehicle, and 

ensure that the platform 

car will not collide with 

the vehicle during the 

lowering operation. 

Keep pressing the Down 

button on the controller, 

so that the platform is 

totally closed.

B6. Step on the brakes 

on four castors, and 

ensure that the wheel 

cannot turn

B8. The tyres are in 

contact with the edge 

of the tabletop as 

shown in the picture, 

to ensure that the 

wheelchair is stably 

placed.

B7. Manually 

grasp the position 

in the picture to 

lift the wheelchair. 

Move the 

wheelchair from 

the trunk to the 

platform car

B9. Buckle the 

safety belt

B4. Keep pressing 

the Up button on 

the controller, till the 

tabletop reaches the 

bottom surface of the 

trunk of the vehicle.

B5. Adjust the 

position of the 

platform car, so 

that the tabletop is 

50mm higher than 

the trunk height. 

Align the two 

yellow lines on the 

platform with the 

tyres.

B10. Release the brakes 

on all castors.

Use Instruction

Summary of Contents for Elev8













Reviews: