Installation
1-68 Manual # 42-02-2P26
• ETS overspeed
• Test should be run at UETS/DETS learned speed + UETS/DETS delta speed + 5FPM
(CONFIG02 > ETS Switches)
• Test will be run in TEST mode
• ETSL overspeed
• Test should be run at ETSL Ove5 FPM (CONFIG 02 > ETS Switches)
• Test will be run in TEST mode
• NTS1 Lower overspeed
• Tests the lower overspeed reaction (emergency slowdown then correction speed)
• Test will be run in TEST mode
• Test should be run at learned speed of U/DNTS1 + Delta Low Speed + 5 FPM (CONFIG
02 > NTS1 Switches)
• NTS1 Upper overspeed
• Tests the upper overspeed reaction (emergency stop then correction speed)
• Test will be run in TEST mode
• Test should be run at learned speed of U/DNTS1 + Delta High Speed + 5 FPM (CON-
FIG 02 > NTS1 Switches)
• NTS2 Lower overspeed
• Tests the lower overspeed reaction (emergency slowdown then correction speed)
• Test will be run in TEST mode
• Test should be run at learned speed of U/DNTS2 + Delta Low Speed + 5 FPM (CON-
FIG 02 > NTS2Switches)
• NTS2 Upper overspeed
• Tests the upper overspeed reaction (emergency stop then correction speed)
• Test will be run in TEST mode
• Test should be run at learned speed of U/DNTS2 + Delta High Speed + 5 FPM (CON-
FIG 02 > NTS2 Switches)