MOVE
- EDITION - V 1.0
13
User
Manual
10.6
Armrest
10.6.1
Installing Flip-back Armrests
Fig. 14a
Fig. 14b
Fig. 14c
• Insert the flip-back pivot (1, 2) (Fig. 14a) and screw it in place,
making sure it stays in place but can rotate easily.
• Insert the armrest (Fig. 14b) on the flip-back pivot than rotate
it until it clicks with the armrest receiver (Fig. 14c) (for clamp
installation, see 10.6.3 installing removable T-armrests).
10.6.2
Adjusting the height of Flip-back armrests
• Flip lever (1) (Fig. 15) left or right to unlock the armrest.
• To adjust height, slide the upper part of the armrest into the
lower part.
• Adjust the structure (2) at the desired height.
• Flip the lever back to the closed position.
• Make sure the armrest clicks in place for complete
securement.
Fig. 15
10.7
Front riggings
10.7.1
Adjusting Footrest length
• Remove screws on front riggings (1) (Fig. 16)
• Slide the extension tube inside the front rigging at the desired
length.
• Reinstall screws (1) at desired length.
• Tighten screws firmly.
Fig. 16
