background image

USER MANUAL | RIGID WHEELCHAIRS –

 

SETTINGS AND MAINTENANCE

NOTE: If you ignore these warnings or fail to inspect or maintain your wheelchair as directed in the manual, you may fall, tip over or lose control of the wheelchair and seriously injure yourself or others and damage the 

wheelchair.

24

9.  MOTION COMPOSITES LIMITED 

WARRANTY

Refer to the Motion Composites warranty document.

IMPORTANT NOTICE ON CONSUMERS RIGHTS

Benefits we give in this manufacturer’s warranty are addi-

tional to, and do not detract from, any rights and remedies 

that you may have under local consumer protection laws.
This manufacturer’s warranty is governed by the laws of the 

country, province, state or territory in which you purchased 

your Motion Composites product. In many countries, consum-

ers have statutory rights under local consumer laws. Those 

consumer rights may differ between countries, territories, 

states or provinces, and often cannot be excluded. This Man-

ufacturer’s warranty is not intended to:
•  change or exclude any statutory consumer rights that 

cannot be lawfully changed or excluded; or

•  limit or exclude any right you have against the person who 

sold the Motion composites product to you if that person 

has breached their sales contract with you.

OUR RESPONSIBILITY

Motion Composites’ sole obligation and your exclusive remedy 

under this warranty shall be limited to such repair and/or replace-

ment. 
WARRANTY SERVICE

If your wheelchair requires warranty service, please contact 

an authorized Motion Composites Dealer in Canada or an autho-

rized international distributor. In the event of a defect in material 

or workmanship, the Dealer or Distributor must obtain a return 

authorization (RA) number from Motion Composites. Motion Com-

posites issues RA numbers only to authorized Motion Composites 

Distributors. 
If you are not satisfied with a service, please write directly to: 

Motion Composites Inc.

160 Armand Majeau, sud

Saint-Roch-de-l’Achigan, Québec

J0K 3H0 Canada
Telephone: 1 866 650-6555

Fax: 1 888 650-6555
[email protected]

motioncomposites.com

or send a mail at: 

[email protected]

IMPORTANT NOTICE

Do not return products to our factory without our prior 

consent. 

CONSUMER NOTICE

1. The foregoing warranty is exclusive, and in lieu of all other 

express warranties, whether written or oral, express or 

implied. Motion Composites shall not be liable for any 

consequential or incidental damages whatsoever. By regis-

tering your Motion Composites wheelchair, you agree with 

all provisions of this warranty.

2. It is forbidden to alter or extend the foregoing express 

warranty or to waive any of the limitations or exclusions.

10  PARTICULAR DAMAGES

10.1  PARTS REPAIRED BY THE SERVICE CENTER

If any of the following circumstances are observed, the user is 

responsible for taking the wheelchair to their service center for 

servicing.
–  Any wheel adjustment;

–  Any defective ball bearings of the forks;

–  Any defective ball bearings of the casters. 

10.2  SPECIAL DAMAGES REQUIRING THE RETURN OF 

THE WHEELCHAIR TO THE MANUFACTURER

Should any of the following conditions occur, always contact your 

qualified service technician for the wheelchair to be returned to 

Motion Composites. 
–  Part of the frame is cracked or broken.

–  The thread of an adjustment nut is damaged.

–  Section of frame and/or crossbar is detached.

–  Abnormal wear of the crossbar.

–  Problems continue to be identified after several adjustments or 

repairs have been made by a qualified service agent.

 -   Any adjustment that requires to manipulate a security screw.

10.3  REPAIR PROCEDURE

Parts that could be repaired by the owner are rear tire and inner 

tube.
–  Parts serviced by the manufacturer or service center:

a. All parts of the wheelchair except for the tires and the inner 

tubes.

b. Parts that can be removed and sent to the manufacturer/

distributor or other party for repair:

c.  Wheels, armrest, footrest, upholstery, cushion.

d. Circumstances in which the wheelchair should be sent for 

service:

e. Broken bearings, loose spokes, wheel not aligned, loose bolt, 

abnormal vibrations, noise or any deviation in the frame, 

front stem bolt is not perpendicular to floor, broken part like 

anti-tippers, back canes, rips or tear on the upholstery and 

for the yearly inspection

–  Please contact our customer service agent for the complete 

list of distributors or service centers.  

motioncomposites.com

–  Some dealers may offer replacement units during the service 

period. Please contact your service agent for full details. Motion 

Composites will hold replacement parts for a minimum of 10 

years or propose a compatible spare option.

–  If the wheelchair needs to be sent to a service center or to the 

manufacturer for service, it should be packed carefully in a 

cardboard box fitting the size of the wheelchair. The anti-tippers, 

the footrest and cushion should be removed and packed in a 

small box inside the larger cardboard box containing the wheel-

chair. The wheelchair should be protected with a protective film 

to avoid scratches or wear. 

10.4 TOOLS

ALLEN KEY

2 mm – 2.5 mm – 3 mm – 4 mm – 5 mm
KEYS

10 mm – 11 mm – 1/2’’ (13 mm) 
FOR QUICK RELEASE:

7/16’’ (11 mm) – 3/4’’ (19 mm) – 26 mm 
OTHER TOOLS

Adjustable wrench – Phillips screwdriver

Summary of Contents for APEX A





































Reviews: