Motion 4 Doors EvoDrive+ Maintenance Manual Download Page 8

Page: 8 / 12

v1.0.0

E maintenance manual

Sen. Exterior
Sen. Interior
But. Exterior
But. Interior

I/O ACCESORIES ELECTRONICS

LED’s State

Situation / Problem

Solution

LEDs OFF

ORANGE LED

COMPLETELY ON

ORANGE LED

COMPLETELY ON

ORANGE LED

COMPLETELY ON

ORANGE LED

COMPLETELY ON

When activating interior sensor, Ext.

Sensor or Safety sensor no orange

led turn on. The door does not work.

The interior sensor led is still on

when there is no detection of move-

ment or presence.

The exterior sensor led is still on

when there is no detection of move-

ment or presence.

The exterior push-button led is

permanently on. The push-button

is permanently blocked in push

position.

The interior push-button led is

permanently on. The push-button

is permanently blocked in push

position.

- Check the wiring connections of all

sensors.

- Check the wiring connection of all

sensors.

- Check all the settings and the sensivi

ty of the sensor.

- Disconnect/Connect the sensor.

- Check the wiring connection of all

sensors.

- Check all the settings and the sensivi

ty of the sensor.

- Disconnect/Connect the sensor.

- Disconnect the push button.

Summary of Contents for EvoDrive+













Search results

Summary of Contents for EvoDrive+

Reviews:

Related manuals for EvoDrive+

Brands by name

Popular brands

Motion 4 Doors EvoDrive+, Maintenance Manual

Search results

Summary of Contents for EvoDrive+

Reviews:

Related manuals for EvoDrive+

Brands by name

Popular brands