background image

COMMON PROBLEMS IN MICROSCOPY

SILVER30 CORDLESS SERIES STEREO MICROSCOPE SPECIFICATIONS

CA

UTION

CA
UTION

NEVER DISASSEMBLE MECHANICAL OR OPTICAL COMPONENTS. THIS SERVICING SHOULD ONLY BE DONE BY AN 

AUTHORIZED MOTIC TECHNICIAN. THE WARRANTY WILL BE NULL AND VOID IF THE MECHANICAL OR OPTICAL COMPO-

NENTS ARE DISASSEMBLED BY A NON-MOTIC DEALER.

PROBLEM

CORRECTION

The illuminator light does not
come on 

Make sure the microscope is plugged into a functional electrical socket.

Make sure the bottom light intensity control is set above “0”.

The bulb may need to be replaced.  

See “Bulb replacement” on page 6.

Unable to bring specimen into focus

Eye lens of the eyepiece is partially unscrewed. Remove the eyepiece and screw the two sections together.

The black turret knob may need to be fully rotated to align the objective lenses into the correct position.

The specimen may not be centered properly on the stage and needs to be re-positioned to be in the optical path. 

Image of the specimen goes out of the 
focus all by itself.

Use the tension control collar to tighten the focusing mechanism found on the focusing spindle.

Focusing knobs turn with difficulty 
even with tension-collar loosened

Microscope should be disassembled, cleaned and re-lubricated by a qualified authorized technician.

IF YOU HAVE A PROBLEM, YOU MAY BE ABLE TO CORRECT IT YOURSELF.

HERE ARE A FEW COMMON PROBLEMS AND EASY SOLUTIONS YOU MAY WANT TO TRY BEFORE CALLING FOR SERVICE: 

MODEL NUMBER

SILVER30-B

SILVER30-S

SILVER39-Z

OBJECTIVES

1X, 3X

2X, 4X

1X – 3X ZOOM

EYEPIECES

N-WF10X/20 

N-WF10X/20

N-WF10X/20 

WORKING DISTANCE 

77mm

77mm

77mm

MAX. SPECIMEN HEIGHT

36mm 

36mm 

36mm 

TOTAL MAGNIFICATION /

FIELD OF VIEW

10X / 20mm

30X / 6.5mm

10X / 10mm

40X / 5mm

10X / 20mm
20X / 10mm

30X / 6.5mm

SILVER30 ILLUMINATOR

(INCIDENT & TRANSMITTED)

Turret variable 6 x 60mW LED,

Top variable 50mW, Bottom 50mW LED 

Corded Stand 

Turret variable 6 x 60mW LED,

Top variable 50mW, Bottom 50mW LED 

Corded Stand 

Turret variable 6 x 60mW LED,

Top variable 50mW, Bottom 50mW LED 

Corded Stand 

SILVER30 

SERIES

 

|  07 

  

SILVER

 LINE

Summary of Contents for 1100201200072










Reviews: